Construction NVQ L3 Course Information

L3 NVQ Diploma in Occupational Work Supervision Course Information

Entry Requirements

There are no formal entry requirements for this qualification. However, candidate must be able to prove their competence via assessments at their workplace to successfully gain the qualification.

Who are the qualifications for?

Trades person who are undertaking more of the Mentoring and Supervising works within their occupation. The candidate must have a level of autonomy and have responsibility for organising other staff in day to day site activities (this will need to be observed). This sheets sets out the units and the candidate requirements that are needed in order to complete the assessment requirements of the NVQ.

Possible Progression Routes for Level 3 Occupational Work Supervision

Candidates achieving a Level 3 NVQ Diploma in Occupational Work Supervision can progress further into technical, supervisory and management qualifications and positions within their own organisations.

To achieve the full qualification you need to complete a total of 5 mandatory units and 2 optional units.

To achieve this qualification a minimum of 67 credits need to be attained. This comprises the 5 mandatory units plus units from the following 2 optional unit group(s).

Mandatory Units(credit value: 52)Units required: 5


Unit Code

Title

Credits

GLH

Level

Unit reference
number

QCF209v2

Confirming Work Activities and Resources for an
Occupational Work Area in the Workplace

10

33

3

A/503/2772

QCF210v2

Developing and Maintaining Good Occupational Working
Relationships in the Workplace

8

27

5

M/503/2915

QCF211v2

Confirming the Occupational Method of Work in the
Workplace

11

37

3

R/503/2924

QCF212v2

Implementing and Maintaining Health, Safety and Welfare
in the Workplace

11

37

3

T/503/2723

QCF213v2

Co-ordinating and Organising Work Operations in the
Workplace

12

40

3

F/503/2725

Optional Units(credit value: 15)Units required: 2


Unit Code

Title

Credits

GLH

Level

Unit reference
number

QCF214v2

Allocating and Monitoring the Use of Plant, Machinery
or Equipment in the Workplace

9

30

3

T/503/2740

QCF215v2

Monitoring Progress of Work Against Schedules in the
Workplace

9

30

3

F/503/2742

QCF216v2

Confirming Work Meets Quality Standards in the
Workplace

9

30

3

J/503/2743

QCF217v2

Implementing Procedures to Support the Team's
Performance in the Workplace

11

37

3

L/503/2744

QCF218v2

Co-ordinating and Confirming the Dimensional Control
Requirements of the Work in the Workplace

8

27

3

D/503/2747

QCF219v2

Contributing to the Circulation of Construction Related
Project Information in the Workplace

7

23

3

H/503/2748

Course Delivery

The course is delivered via Onsite Assessments and Training (OSAT) Route. Assessments take place at candidate's workplace by a Competent and Qualified Assessor. Candidate needs to prove their competence in the chosen units to be able to achieve the qualification.

Fees

Course Fees:

    £3345

Note: Fee charges are applicable to the provision of the complete qualification delivery and include all assessments, support, course materials, registration, certification and any underpinning job knowledge training as may be required and are the services provided by Academy Training Group Limited for said fees. They do not relate to the individual or collective number of units completed in the achievement of the qualification. Fees are payable in full by the learner regardless of whether they complete the course/qualification or not.

Funding Support

This course is eligible for a Student loan. For further information please call on 0844 811 1240

L3 NVQ Diploma in Wood Occupations (Construction) - Site Carpentry Course Information

Entry Requirements

There are no formal entry requirements for this qualification. However, candidate must be able to prove their competence via assessments at their workplace to successfully gain the qualification.

Who are the qualifications for?

All Carpenters who have accumulated the requisite amount of experience and skill to satisfy the standards of the qualification and who may now be undertaking more complicated or complex works. The candidate will have a level of autonomy and have responsibility for organising other staff in day to day site activities (this will need to be observed). This sheets sets out the units and the candidate requirements that are needed in order to complete the assessment requirements of the NVQ.

Possible Progression Routes for Level 3 Site Carpentry

Candidates achieving a Level 3 NVQ Diploma in Site Carpentry can progress further into higher supervision roles such as a Level 3 NVQ Diploma in Occupational Work Supervision (Technical), or other supervisory and management qualifications in Construction.

To achieve the full qualification you need to complete a total of 7 mandatory units and 2 optional units. .

Mandatory Units (credit value: 100) Units required: 7


Unit Code

Title

Credits

Level

QCF09B

Installing
Bespoke First Fixing Components in the Workplace

20

3

QCF10B

Installing
Bespoke Second Fixing Components in the Workplace

25

3

QCF209v2

Confirming
Work Activities and Resources for an Occupational Work Area in the Workplace

10

3

QCF210v2

Developing
and Maintaining Good Occupational Working Relationships in the Workplace

8

5

QCF211v2

Confirming
the Occupational Method of Work in the Workplace

11

3

QCF628

Setting Up and
Using Transportable Cutting and Shaping Machines in the Workplace

24

2

QCF641

Conforming to
General Health, Safety and Welfare in the Workplace

2

1

Optional Units (credit value: 46) Units required: 2


Unit Code

Title

Credits

Level

QCF11v2

Erecting
Structural Carcassing Components in the Workplace

20

2

QCF25v2

Maintaining
Non-structural or Structural Components in the Workplace

29

3

QCF631

Erecting
Complex Roof Structure Carcassing Components in the Workplace

26

3



For candidates who have already achieved a QCF Level 2 Diploma in Site Carpentry , most will have already achieved 4 of the mandatory units show in Red above, this will leave them with on 5 units to do to complete the full Level 3 Diploma, these being the remaining 3 Mandatory units and 2 out of the 3 optional units.

Course Delivery

The course is delivered via Onsite Assessments and Training (OSAT) Route. Assessments take place at candidate's workplace by a Competent and Qualified Assessor. The Candidate needs to prove their competence in the chosen units to be able to achieve the qualification.

Fees

Course Fees:

    £3,600

Note: Fee charges are applicable to the provision of the complete qualification delivery and include all assessments, support, course materials, registration, certification and any underpinning job knowledge training as may be required and are the services provided by Academy Training Group Limited for said fees. They do not relate to the individual or collective number of units completed in the achievement of the qualification. Fees are payable in full by the learner regardless of whether they complete the course/qualification or not. /p>

Funding Support

This course is eligible for a Student loan. For further information please call on 0844 811 1240

L3 NVQ Diploma in Decorative Finishing - Painting and Decorating (Construction)Course Information

Entry Requirements

There are no formal entry requirements for this qualification. However, candidate must be able to prove their competence via assessments at their workplace to successfully gain the qualification.

Who are the qualifications for?

All Painter Decorators who have accumulated the requisite amount of experience and skill to satisfy the standards of the qualification and who may now be undertaking more complicated or complex works. The candidate will have a level of autonomy and have responsibility for organising other staff in day to day site activities (this will need to be observed). This sheets sets out the units and the candidate requirements that are needed in order to complete the assessment requirements of the NVQ.

Possible Progression Routes for Level 3 Occupational Work Supervision

Candidates achieving a Level 3 NVQ Diploma in Decorative Finishing - Painting and Decorating can progress further into higher supervision roles such as a Level 3 NVQ Diploma in Occupational Work Supervision (Technical), or other supervisory and management qualifications in Construction.

To achieve the full qualification you need to complete a total of 7 mandatory units and 2 optional units.

To achieve this qualification a minimum of 123 credits need to be attained. This comprises the 7 mandatory units plus units from the following 2 optional unit group(s).

Mandatory Units (credit value: 92)Units required: 7


Unit Code

Title

Credits

GLH

Level

Unit reference
number

QCF209v2

Confirming Work Activities and Resources for an
Occupational Work Area in the Workplace

10

33

3

A/503/2772

QCF210v2

Developing and Maintaining Good Occupational Working
Relationships in the Workplace

8

27

5

M/503/2915

QCF211v2

Confirming the Occupational Method of Work in the Workplace

11

37

3

R/503/2924

QCF250C

Erecting and Dismantling Access/Working Platforms in
the Workplace

8

27

2

D/600/8281

QCF332v2

Preparing surfaces for painting/decorating in the
workplace

27

90

3

R/503/9680

QCF333Bv2

Applying Paint Systems to Complex Surfaces by Brush in
the Workplace

26

87

3

F/503/9688

QCF641

Conforming to General Health, Safety and Welfare in the
Workplace

2

7

1

A/503/1170

Optional Units - Group A(credit value: 20)Units required: 1


Unit Code

Title

Credits

GLH

Level

Unit reference number

QCF336v2

Hanging Standard Paper Wallcoverings in the Workplace

26

87

3

D/503/9696

QCF337v2

Hanging Wide-width Vinyls in the Workplace

20

67

3

Y/503/9700

Optional Units - Group B(credit value: 11)Units required: 1


Unit Code

Title

Credits

GLH

Level

Unit reference number

QCF339v2

Applying Coatings by the Airless Spray Method in the Workplace

17

57

3

D/503/9732

QCF340v2

Applying Coating by the Air Spray Method in the
Workplace

27

90

3

H/503/9733

QCF342v2

Producing and Applying Complex Stencil Designs in the
Workplace

21

70

3

K/503/9734

QCF343v2

Hanging Wallcoverings to Complex Surfaces in the
Workplace

32

107

3

F/503/9738

QCF346v2

Hanging Specialised Paper Wallcovering in the Workplace

28

93

4

R/503/9761

QCF347v2

Producing Comb Textured Finishes in the Workplace

16

53

3

D/503/9763

QCF348v2

Applying Metal Leaf to Surfaces in the Workplace

22

73

3

J/503/9790

QCF646

Installing Coving and Decorative Mouldings in the Workplace

11

37

2

A/503/9804

QCF647

Applying Coatings to Produce Textured Finishes in the
Workplace

14

47

2

Y/503/9809

QCF648

Producing Broken Colour Effects in the Workplace

12

40

2

L/503/9810

QCF649

Producing Stencil Designs using Pre-cut Stencil Plates
in the Workplace

12

40

2

L/503/9953

QCF650

Producing Straight Grained Effects in the Workplace

12

40

2

D/503/9956

QCF651

Producing Quality Replica Grained Finishes in the
Workplace

20

67

4

R/504/4197

QCF652

Producing Marbling Effects in the Workplace

12

40

2

K/503/9961

QCF653

Producing Quality Replica Marble Finishes in the
Workplace

15

50

3

H/503/9960

For candidates who have already achieved a QCF Level 2 Diploma Decorative Finishing and Industrial Painting Occupations, most will have already achieved 4 of the mandatory units show in Red above, this will leave them with on 5 units to do to complete the full Level 3 Diploma, these being the remaining 3 Mandatory units and 2 out of the 3 optional units.

Course Delivery

The course is delivered via Onsite Assessments and Training (OSAT) Route. Assessments take place at candidate's workplace by a Competent and Qualified Assessor. Candidate needs to prove their competence in the chosen units to be able to achieve the qualification.

Fees

Course Fees:

    £3,600

Note: Fee charges are applicable to the provision of the complete qualification delivery and include all assessments, support, course materials, registration, certification and any underpinning job knowledge training as may be required and are the services provided by Academy Training Group Limited for said fees. They do not relate to the individual or collective number of units completed in the achievement of the qualification. Fees are payable in full by the learner regardless of whether they complete the course/qualification or not.

Funding Support

This course is eligible for a Student loan. For further information please call on 0844 811 1240